T60 Series Low Pressure
Maximum Flow Rate: 93 gpm (354 l/min) 3209 BPD Maximum Pressure: 1000 psi (69 bar)
| Maximum Flow Rate: | 93 gpm (354 l/min) 3209 BPD |
| Maximum Pressure: | 1000 psi (69 bar) |
Diaphragm Pump Features
Low Pressure Model T60C
- Integrates Wanner Hydra-Cell® Pro seal-less pump technologies for the highest levels of volumetric and energy efficiencies across a full rpm range.
- Patented ADPC (Advanced Diaphragm Position Control) and hydraulic oil management system protect diaphragms under closed or restricted inlet conditions.
- Can run dry indefinitely without damage to the pump.
- Pumped fluid is 100% contained – zero environmental impact, no ground contamination, no volatile emissions.
- Seal-less design eliminates leaks, hazards, and the expense associated with seals and plunger packing.
- Exceeds API 675 standards for accuracy, linearity, and repeatability.
- Reliably handles a wide range of viscosities and shear sensitivities, corrosive fluids, abrasives, slurries, and particulates.
- Reduced ownership costs – acquisition, operation, service, maintenance, and energy use.
T60 Series Low Pressure Resources
T60 Low Pressure
| Model | Pressure psi (bar) | rpm | gpm | l/min | BPD |
|---|---|---|---|---|---|
| T60C | 1000 (69) | 600 | 93 | 354 | 3209 |
| Delivery @ Pressure psi (bar) | gal/rev | liters/rev | |
|---|---|---|---|
| T60C | 500 (34) | 0.158 | 0.598 |
| 1000 (69) | 0.156 | 0.590 |
| rpm | |
|---|---|
| Maximum: | 600 |
| Minimum: | 60 |
| Consult factory for speeds less than 60 rpm |
| Maximum Discharge Pressure | |
| Metallic Heads: | |
| T60C | 1000 psi (69 bar) |
| Maximum Inlet Pressure | 500 psi (34 bar) |
| Operating Temperature | |
| Maximum: | 180 ̊F (82.2 ̊C) |
| Minimum: | 40 ̊F (4.4 ̊C) |
| Consult factory for temperatures outside this range | |
| Maximum Solids Size | 800 microns |
| Input Shaft | Left or Right Side |
| Inlet Ports | Weld-On: 4 inch / SCH. 40 |
| 4 inch Class 300 RF ANSI Flange | |
| 4 inch NPT | |
| Discharge Ports | Weld-On: 2 inch / SCH. 160 |
| 2 inch Class 2500 RTJ ANSI Flange | |
| 2 inch NPT | |
| Plunger Stroke Length | 3 inch (76.2 mm) |
| Shaft Diameter | 3 inch (76.2 mm) |
| Shaft Rotation | Uni-directional (see rotation arrow) |
| Oil Capacity | 20.5 US quarts (19.4 liters) - oil level back cover |
| Pump Weight | 873 lbs. (396 kg) |
| Fluid End Materials | |
| Manifold: | Nickel Aluminum Bronze (NAB) |
| 316L Stainless Steel CF3M | |
| Diaphragm/Elastomers: | FKM |
| Buna-N | |
| Diaphragm Follower Screw: | 316 Stainless Steel |
| Valve Spring Retainer: | 316 SST |
| Check Valve Spring: | Elgiloy |
| Valve Disc/Seat: | 17-4 Stainless Steel |
| Nitronic 50 | |
| Power End Materials | |
| Crankshaft: | Forged Q&T Alloy Steel |
| Connecting Rods: | Ductile Iron |
| Crossheads: | 12L14 Steel |
| Crankcase: | Ductile Iron |
| Bearings: | Spherical Roller (main bearing) |
| Steel Backed Babbit (crankpin) | |
| Bronze (wristpin) |
| Datasheets | |
|---|---|
| T60 Low Pressure Specifications |  |
