Reverse Osmosis Pump Applications and Advantages

Applications by Market

Application-ReverseOsmos

Reverse Osmosis Pumps

The demand for fresh water is growing all over the world. Reverse osmosis is the process that separates salt and other contaminants from water and other fluids. The most efficient reverse osmosis systems utilize high pressure to purify large volumes of water. On large marine vessels and in remote areas of the world, much of the water comes directly from the ocean. With no cups, packings or seals, the Hydra-Cell pump is ideally suited to deliver smooth, high pressure sea water to the separation membranes of the reverse osmosis unit.

We're in your industry - Please contact us for help!

  • Solvent and acid recovery
  • Process water treatment
  • Separation of fluids
  • Seawater desalination
  • Concentration of chemicals
  • Concentration of fruit juices

Other reverse osmosis applications include chemical separation for the ink, food and pharmaceutical industries.

Wanner Reprint.indd

Hydra-Cell-Family-0676-550

Hydra-Cell Seal-less Pump Advantages

Hydra-Cell is a positive displacement diaphragm pump that features a seal-less design to offer significant performance benefits for pump users.

  • No seals, cups, or packaging to leak, wear, adjust or replace. This minimizes downtime and reduces yearly maintenance costs.
  • Seal-less design makes Hydra-Cell an environmentally friendly pump because there is no leak path or undesirable emissions.
  • Hydra-Cell pumps can run dry indefinitely without damage. This eliminates downtime and repair costs.
  • Patented diaphragm protection (for most Hydra-Cell models) allows the pump to operate in case of a closed or blocked suction line due to an accident or operator error.
  • Unique seal-less, diaphragm design and check valve orientation enable the pump to handle abrasives and particulates up to 800 microns in size (depending on model). This can eliminate the need for expensive fine filtration.
  • Pumps the full spectrum of low-to-high viscosity fluids.
  • Accurate control of the flow rate by varying the pump speed over a wide range of discharge pressures and fluid viscosities.
  • Tolerates non-ideal operating conditions.
  • Available with an assortment of materials to resist corrosion, chemical attack, and abrasive wear.
  • Mechanical efficiencies of 80 to 90% provide significant energy savings compared to other pumping technologies.
  • Simple, compact design with rugged construction provides a wide range of installation options that reduces acquisition and operating costs.
  • Maximum flows range from 8 gallons per hour (gph) to 157 gallons per minute (gpm) with discharge pressures up to 5000 psi depending on model. (See “Model Lookup” for details.)
  • Low NPSH requirements allow for operation with a vacuum condition on the suction – positive suction pressure is not necessary.
  • Hydraulically balanced diaphragms handle high pressures with low stress for longer pump life.
  • Multiple-diaphragm design (except the F20 and P100) provide virtually pulse-free flow without the need for expensive pulsation dampeners.

Hydra-Cell® Sealless Pump Selection Guide

Navigation

NEXT

Explore Hydra-Cell Pumps and Metering Pumps...

Hydra-Cell Pumps Overview

Get to know Hydra-Cell Seal-less Design Advantages.

Metering Pumps Overview

Get to know Hydra-Cell high-performance metering pumps.
TOP
X