Parts washing is one of the most common production steps for any industry that cuts, grinds or drills metal parts. Produced parts are covered with machining coolant, metal fines, and grime. While parts washers exist in many styles, they are all plagued by the same common problem; they require large reservoirs due to their low pressure, high volume flooding action. With piston/plunger style pumps, this becomes a time-consuming cleaning process because it requires extensive filtration in order to delay seal failure. Inability to heat the fluid due to cups, packings and seals also slows production.
|
|
| The Hydra-Cell pump delivers recirculated hot cleaning fluids at high pressure for the most difficult cleaning jobs. Filtration can be reduced to a minimum as the Hydra-Cell's seal-less pumping action handles particles up to 500 microns. Using smaller nozzles to create greater pressures also reduces the overall amount of solvent required in the washer.
Using less solvent, using less filtration, and the ability to increase solvent temperature are all Hydra-Cell advantages. The best benefit of all – high pressure cleans better than low pressure! |
|
Wanner Engineering, Inc.
Wanner International Ltd.